QUAD POWER
Versatile and Powerful Cleaning Solution
QUAD POWER is a highly concentrated, cost-effective cleaning solution available in various sizes to meet your needs.This powerful formula effectively removes grease, grime, and dirt from a wide range of surfaces, making it an essential tool for HVACR contractors and their clients.
Key Features and Benefits:
- Versatile Applications: Cleans microchannels, mini splits, air-cooled condensers, evaporator coils, permanent filters, fan blades, motors, and other equipment.
- Powerful Cleaning Action: Removes stubborn grease, grime, and dirt.
- Deodorizing Properties: Eliminates unpleasant odors.
- Safe and Effective: Safe for use on rubber, membrane, and metal roofs.
- NSF Approved: Meets NSF standards for safety and effectiveness.
QUAD POWER is available in multiple formats, including a pre-mixed gallon bottle, a spray bottle, an aerosol spray,and a 5-gallon jug. Choose the size that best suits your needs.
Experience the power of QUAD POWER and restore your equipment to its optimal performance.
Part Number; Size
- QP-1 1 gal 4/cs
- QP-5 5 gallons
- QP-RTU 32 oz ready to use quart 12/cs
- QPA-1 20 oz aerosol 12/cs
Directions:
Effective Cleaning for HVAC Systems
General Precautions:
- Wear Protective Gear: Always wear goggles, gloves, and protective clothing.
- Turn Off System: Shut down the HVAC system before cleaning.
Condensers:
- Dilute: Mix 4 parts water with 1 part QUAD POWER.
- Prepare Sprayer: Add water and cleaner to the sprayer.
- Spray Coil: Spray the solution onto the dirty surface.
- Soak: Let the solution sit for 5-7 minutes.
- Rinse: Rinse with water.
- Clean Sprayer: Rinse out the sprayer, wand, and nozzle.
- Repeat: For extremely dirty coils, consider a second application.
Evaporators/Mini Splits/Micro Channels:
- Dilute: Mix 10 parts water with 1 part QUAD POWER.
- Spray and Soak: Apply the solution to the dirty surface and let it soak for 5-10 minutes.
- Resume Operation: Return the system to operation. Condensation will rinse away the solution.
- Clean Sprayer: Rinse out the sprayer, wand, and nozzle.
- Repeat: For extremely dirty coils, consider a second application.
Permanent Filters:
- Prepare Solution: For every gallon of water, add 1 ounce of QUAD POWER.
- Soak: Soak the greasy components in the solution for at least 15 minutes.
- Rinse: Rinse with water.
Quad Power Aerosol:
- Wear Protective Gear: Ensure you’re wearing goggles, gloves, and protective clothing.
- Shake Can: Shake the canister well.
- Spray: Remove the cap and spray the solution onto the surface.
- Wait: Allow the foam to liquefy for 5-10 minutes.
- Rinse: Rinse the surface with water.
Note on Roofing Materials:
- Test Before Cleaning: Due to potential effects on color and finish, test QUAD POWER on a small area of the roof before cleaning.
- Rubber Roofs: QUAD POWER is generally safe for rubber and membrane roofs, but test on a small area first.
By following these directions, you can effectively clean and maintain your HVAC system using QUAD POWER.
DANGERS & PRECAUTIONS:
Do not get in eyes, on the skin, or on clothing. Avoid breathing dust/fume/ gas/mist/vapors/spray. Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection/face protection.
