XPRESS INJECTOR HOSE
XPRESS INJECTOR HOSE is used for installing Xpress Injects products into Air Conditioning or Refrigeration Systems. It saves time and makes installation simple and easy.
Part Number; Size
- XPS-HOSE 6/cs
Directions:
Turn the A/C system on and then check to see if the compressor is on and the system is fully charged.
- Ensure the ball valve is closed before attaching the “A” side of the hose to the high-pressure service port.
- Barely thread the male end of the injector tube to the “B” side of the hose. Do not depress the valve. Next, crack open and close the ball valve to remove air from the hose. Then, thread the tube into the “B” side of the hose.
- Connect the female end of the injector tube to the low-pressure service port and then open the ball valve. Let refrigerant flow through and then inject the product into the system. Close the ball valve and then disconnect the hose and injector from the unit.
- Remove the tube from the “B” side of the hose and open the ball valve to release charge. This prevents contamination.
Related Products:
