MAGNA TACK
Versatile High-Strength Adhesive
MAGNA TACK is a powerful adhesive designed to bond a variety of materials, including fiberglass insulations,urethane, rubber sheet, duct board, and bubble foil to sheet metal. Its exceptional bonding strength and versatility make it suitable for a wide range of applications.
Key Features and Benefits:
- Strong Bonds: Creates both permanent and temporary bonds on various surfaces.
- Versatile Applications: Bonds to fiberglass, urethane, rubber, duct board, bubble foil, and other materials.
- Suitable for Uneven Surfaces: Works effectively on porous or uneven surfaces.
- Waterproof and Flexible: Resists moisture and maintains flexibility.
- Transparent and Non-Staining: Does not discolor or leave residue.
- Easy Cleanup: Cleans up with mineral spirits.
- MAGNA TACK Aerosol (MTA-1): Low VOC and MIR 50 State Compliant for environmentally conscious applications.
MAGNA TACK is a reliable and effective adhesive solution for a variety of bonding needs. Its versatility, strength, and ease of use make it an ideal choice for professionals and DIY enthusiasts.
Part Number; Size
- MTA-1 12 oz aerosol 12/cs
- MT-LC Large 35LB cylinder
- MTAR-SC Small 15LB cylinder (REMOVER)
Red
- MR-1 1 gal 4/cs
- MR-5 5 gallons
- MR-55 55 gallons
Black
- MB-1 1 gal 4/cs
- MB-5 5 gallons
- MB-55 55 gallons
UL Listed Red
- UMR-1 1 gal 4/cs
- UMR-5 5 gallons
- UMR-55 55 gallons
UL Listed Black
- UMB-1 1 gal 4/cs
- UMB-5 5 gallons
- UMB-55 55 gallons
DIRECTIONS:
Aerosol Directions:
- Shake Well: Ensure the can is shaken vigorously before use.
- Remove Cap: Remove the cap from the aerosol can.
- Aim Nozzle: Point the opening in the desired direction.
- Maintain Distance: Hold the can 8-12 inches away from the surface.
- Spray in Sweeping Motions: Apply the adhesive using a side-to-side spraying motion for even coverage.
- Temporary Bonds: Apply adhesive to one surface and allow it to become tacky. Then, apply the material to be bonded.
- Permanent Bonds: Apply adhesive to both surfaces to be joined. Allow them to become tacky before pressing together.
- Prevent Clogging: After use, invert the can and spray a few short bursts to clear the valve. Wipe away any adhesive buildup around the nozzle opening while wet.
Gallon Directions:
- Apply Base Coat: Spray, brush, or roll a light coat of MAGNA TACK inside the sheet.
- Apply Edge Coat: Apply a thicker coat around the edges for a strong bond.
- Contact Cement: For additional bonding strength, spray a light coat on both the insulation and metal.
By following these directions, you can effectively apply MAGNA TACK for secure and durable bonding.
DANGERS & PRECAUTIONS
Read and understand the product’s label and Safety Data Sheet. Extremely Flammable Aerosol Contains gas under pressure: May explode if heated. Causes skin and eye irritation. Suspected of damaging fertility or the unborn child. May cause drowsiness or dizziness. Damage to the central nervous system may happen through prolonged or repeated exposure. If the product is swallowed or enters airways it may be fatal. Keep out of reach of children. Keep away from heat sources such as sparks, open flames, and hot surfaces. No smoking around this product. Do not spray on an open flame or other ignition sources. Pressurized container. Do not expose to temperatures exceeding 50C/ 122F. Wash hands thoroughly after handling. Wear protective gloves and eye protection.
