Zinc Spray aerosol can for cold galvanizing iron and steel

Zinc Spray ZS-1

ZINC SPRAY – is a high solids, zinc-rich coating that forms an electrolytic bond on metal surfaces and prevents the formation of rust and corrosion. Prevents further damage and stops creep-age in areas where rusting has already occurred. It provides a cold applied coating which equals the performance of hot-dip galvanize treatments. Resists abrasion and large temperature fluctuations.

SKU: ZS-1 Categories: , Tags: , , , , , , , , , , , , , , , , , , , , , Brand:

ZINC SPRAY

Powerful Corrosion Protection for Metal Surfaces

ZINC SPRAY is a high-quality zinc-rich coating designed to prevent rust and corrosion on metal surfaces. Its advanced formula forms an electrolytic bond, providing superior protection against the elements.

Key Features and Benefits:
  • Stops Rust and Corrosion: Protects metal surfaces from the damaging effects of rust and corrosion.
  • 68% Zinc Content: Offers exceptional corrosion resistance.
  • Ideal for Iron and Steel: Specifically formulated for use on these metals.
  • Prevents Further Damage: Stops the spread of rust and corrosion in affected areas.
  • Cold-Applied Coating: Provides the performance of hot-dip galvanizing without the need for heat.
  • Resists Abrasion and Temperature Fluctuations: Durable and long-lasting.

ZINC SPRAY is a reliable and effective solution for protecting metal surfaces from rust and corrosion. Its advanced formula and superior performance make it an ideal choice for professionals and homeowners alike.

Part Number;                  Size
  • ZS-1                                    16 oz 12/cs
Directions:

Effective Application for Rust and Corrosion Protection

  1. Shake Vigorously: Shake the can vigorously before and during use to ensure the zinc particles are evenly suspended.
  2. Prepare Surface: Ensure the surface is clean and free from rust, oil, grease, and old paint.
  3. Maintain Distance: Spray from a distance of at least 10 inches to ensure even application.
  4. Apply in Sweeping Motions: Use a sweeping motion to cover the surface evenly.
  5. Dry Time: Allow the coating to dry for approximately 15 minutes before touching.
  6. Painting: The coating can be painted over after six hours of drying.
  7. Curing Time: Allow 24-48 hours for the coating to fully cure.
  8. Multiple Thin Coats: Apply several thin coats for optimal protection instead of one thick coat.
  9. Prevent Clogging: After each use, invert the can and spray a few short bursts to clear the valve.

By following these directions, you can effectively apply ZINC SPRAY for superior rust and corrosion protection.

 

DANGERS & PRECAUTIONS:

Read and understand the product’s label and Safety Data Sheet. Extremely flammable aerosol. Contains gas under pressure: May explode if heated. It causes skin and serious eye irritation. May cause drowsiness and dizziness. May be fatal if swallowed and enters airways. Sensitive to static charge. Keep out of reach of children. Keep away from sparks, open flames, and hot surfaces. No smoking. Do not spray on an open flame or other ignition sources. Use only outdoors or in a well-ventilated area. Wear safety glasses and chemical resistant gloves when using the product. Wash hands thoroughly after handling. Do not breathe vapors. Do not eat, drink, or smoke while using the product.

Contact Us

News and Updates

Subscribe on Youtube

Follow Us on Facebook 

 

 

SDS

⚠️ ZINC SPRAY SDS – DOWNLOAD

1. IDENTIFICATION & SUPPLIER DETAILS

Product Name Zinc Spray Aerosol
Product Number ZS-1
Brand Vapco
Recommended Use Zinc cold galvanizing coating aerosol
Supplier Name Vapco Products, Inc.
Address 401 Marshall Road, Valley Park, Missouri 63088, United States
Telephone / Fax (636) 923-2121 / (636) 923-3002
Emergency Phone (800) 255-3924 (ChemTel)

2. HAZARD IDENTIFICATION & COMPOSITION

GHS Classification Acute Tox. 4 (Inhalation); Flam. Aerosol 1; Press. Gas (Liq.); Repr. Tox. 2; Skin Irrit. 2; STOT RE 2; STOT SE 3
Signal Word DANGER
Hazard Statements H222: Extremely flammable aerosol

H280: Contains gas under pressure; may explode if heated

H315: Causes skin irritation

H332: Harmful if inhaled

H336: May cause drowsiness or dizziness

H361: Suspected of damaging fertility or the unborn child

H373: May cause damage to organs through prolonged or repeated exposure
Hazardous Components CAS No. Concentration
Benzene, dimethyl- (Xylene) 1330-20-7 30 – 40 %
Petroleum gases, liquified, sweetened 68476-86-8 20 – 30 %
Toluene 108-88-3 15 – 20 %

3. PHYSICAL & CHEMICAL PROPERTIES

Physical State / Appearance Liquid / Gray Aerosol Spray
Odor Solvent odor
Flammability Extremely flammable aerosol
Density / Relative Density 1.15-1.30
Kinematic Viscosity 6-22 cPs
Evaporation Rate >3 Fast
VOC Content 58%
Solubility in Water Moderate

4. STABILITY & REACTIVITY

Chemical Stability Stable
Conditions to Avoid Temperatures greater than 122°F (50°C) and sources of ignition.
Incompatible Materials Some plastics, strong oxidizing agents, acids, caustics, alkalis, and chemically active metals.
Hazardous Decomposition Carbon oxide(s).

5. TOXICOLOGICAL INFORMATION

Acute Toxicity (Toluene) LD50 Oral (Rat): >5580 mg/kg; LD50 Skin (Rabbit): 12196 mg/kg
Inhalation Effects May cause drowsiness, dizziness, anesthetic effects, and Central Nervous System depression.
Skin/Eye Effects Causes skin irritation, defatting, and dermatitis. May cause serious eye irritation, redness, and tearing.
Aspiration Hazard May be fatal if swallowed and enters airways.
Reproductive Toxicity Suspected of damaging the unborn child.

6. FIRST-AID MEASURES

Inhalation Remove to fresh air. Keep at rest. Seek medical attention.
Skin Contact Drench with water for 15 mins. Remove contaminated clothing.
Eye Contact Rinse with water for 15 mins. Remove contact lenses. Seek medical attention.
Ingestion Rinse mouth. Do NOT induce vomiting. Seek immediate medical attention.

7. FIRE-FIGHTING & ACCIDENTAL RELEASE MEASURES

Extinguishing Media Dry chemical, foam, or carbon dioxide (CO2).
Fire Hazards Explosion hazard in heat. Vapors are heavier than air and may flash back.
Spill Cleanup Eliminate ignition sources. Ventilate area. Absorb with liquid-binding material. Dispose of safely.

8. HANDLING, STORAGE & PPE

Handling Avoid contact with skin/eyes. Do not spray on open flame. Do not pierce or burn.
Storage Store locked up in a cool, well-ventilated place. Keep below 50°C/122°F.
PPE Chemical goggles, protective gloves, fire-resistant clothing, and NIOSH-approved respiratory protection.

9. TRANSPORT & REGULATORY INFORMATION

DOT/IMDG/IATA UN1950, Aerosols, flammable, Class 2.1
California Prop 65 WARNING: Contains Toluene, known to cause birth defects or reproductive harm.
TSCA Inventory All components listed.

10. DISPOSAL & ECOLOGICAL INFORMATION

Ecotoxicity Toxic to aquatic life. Contains Toluene (LC50 Rainbow Trout: 7.63 mg/l).
Disposal Dispose of in accordance with local/national regulations. Waste likely hazardous under RCRA.

11. DISCLAIMER & PREPARATION INFORMATION

Disclaimer The information is provided without warranty, expressed or implied, regarding its correctness. The user is responsible for full compliance with regulations.
Prepared By Jessica Wilson
Date Prepared 3/20/2025

Related products