Stainless Steel Cleaner and Polisher
Restore Stainless Steel to its Original Luster with Vapco’s Cleaner and Polisher
Our PH-neutral Stainless Steel Cleaner and Polisher is designed to quickly and effectively clean, shine, and protect stainless steel surfaces. With its powerful formula, this product effortlessly removes dirt, dust, fingerprints, residue, and grease, leaving behind a brilliant, streak-free finish.
Key Features and Benefits:
- Fast-Acting Cleaning: Quickly restores stainless steel to its original luster.
- Protective Coating: Helps resist dust, dirt, and grime for long-lasting shine.
- Versatile Applications: Ideal for stainless steel refrigerators, microwaves, ovens, stoves, grills, sinks, range hoods, trash cans, warming drawers, and compactors.
- Easy to Use: Simply spray and wipe for a sparkling finish.
Achieve a “brand new” look on your stainless steel appliances with Vapco’s Stainless Steel Cleaner and Polisher.
Part Number; Size
DIRECTIONS:
Achieve a Brilliant Finish in a Few Simple Steps:
- Prepare Surface: Ensure the stainless steel surface is clean and free from debris.
- Spray or Apply: Spray the cleaner directly onto the surface or onto a clean cloth.
- Wipe and Polish: Wipe the surface with a clean, microfiber cloth, following the grain of the metal.
- Remove Excess: Wipe the surface with a clean, dry cloth to remove any excess cleaner.
- Buff for Extra Shine: For an even more brilliant finish, buff the surface again in the direction of the grain.
By following these steps, you can restore your stainless steel surfaces to their original luster.
PRECAUTIONARY STATEMENT(S): Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: do not pierce or burn, even after use. Protect from sunlight. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
FIRST AID MEASURES: General Advice: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). If Inhaled: First, take proper precautions to ensure your own safety before attempting rescue (e.g. wear appropriate respiratory protective equipment, use the buddy system), then remove the exposed person to fresh air. Keep at rest in a position comfortable for breathing. Get medical advice/attention. In Case of Skin Contact: Immediately drench affected area with water for at least 15 minutes. Remove contaminated clothing immediately. Obtain medical attention if irritation develops or persists. In Case of Eye Contact: Immediately rinse with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if irritation develops or persists. If Swallowed: Rinse mouth. Do NOT induce vomiting. Obtain medical attention.
Contact Us
News and Updates
Subscribe on Youtube
Follow Us on Facebook
SDS
⚠️ STAINLESS STEEL CLEANER SDS – DOWNLOAD
1. Identification & Supplier Details
| Product Name |
Stainless Steel Polish and Cleaner Aerosol |
| Product Number |
SSPA-1 |
| Brand |
Vapco |
| Recommended Use |
Stainless steel polish & cleaner |
| Supplier Information |
Vapco Products, Inc.
401 Marshall Road, Valley Park, Missouri 63088, United States |
| Contact Details |
Phone: (636) 923-2121 | Email: [email protected] |
| Emergency Phone |
(800) 255-3924 |
2. Hazard Identification & Composition
| GHS Classification |
Eye damage/irritation, Cat. 2A; Flammable aerosols, Cat. 2; Gases under pressure, compressed gas |
| Signal Word |
WARNING |
| Hazard Statements |
H223: Flammable aerosol
H280: Contains gas under pressure; may explode if heated
H319: Causes serious eye irritation |
| Hazardous Component |
CAS No. |
Concentration |
| Alkanes, C11-12-iso- |
246538-76-1 |
50 – 70 % (weight) |
| Isopropyl alcohol |
67-63-0 |
1 – 10 % (weight) |
| Hydrocarbons, C6-rich, hydrotreated light naphtha distillates |
101316-67-0 |
1 – 5 % (weight) |
| Siloxanes and Silicones, di-Me |
63148-62-9 |
0.1 – 1 % (weight) |
3. Physical & Chemical Properties
| Physical State & Appearance |
Liquid; Aerosol spray; Colorless |
| Odor |
Vanilla |
| Flammability |
Considered a flammable aerosol by OSHA |
| Density / Relative Density |
0.93-1.03 |
| Solubility |
Insoluble in water |
| pH |
N/A |
4. Stability & Reactivity
| Chemical Stability |
Product is stable under normal conditions of use. |
| Conditions to Avoid |
Avoid excessive heat, sparks, open flames, and ignition sources. |
| Incompatible Materials |
Strong oxidizing agents. |
| Hazardous Decomposition |
Carbon oxide(s). |
5. Toxicological Information
| Acute Toxicity (Isopropanol) |
LD50 Oral (Rat): 5045 mg/kg
LC50 Inhalation (Rat): 16000 ppm (8 hrs)
LD50 Skin (Rabbit): 12800 mg/kg |
| Eye Irritation |
May cause mild eye irritation. |
| Other Effects |
No data available for skin corrosion, sensitization, mutagenicity, or carcinogenicity. |
6. First-Aid Measures
| Inhalation |
Remove to fresh air. Keep at rest. Get medical advice if symptoms persist. |
| Skin Contact |
Drench with water for 15 mins. Remove contaminated clothing. Obtain medical attention if irritation persists. |
| Eye Contact |
Rinse with water for at least 15 minutes. Remove contact lenses if possible. Obtain medical attention. |
| Ingestion |
Rinse mouth. Do NOT induce vomiting. Obtain medical attention. |
7. Fire-Fighting & Accidental Release Measures
| Extinguishing Media |
Dry chemical, foam, or carbon dioxide (CO2). |
| Fire Hazards |
Explosion hazard; container may burst if heated. Vapors are heavier than air. |
| Spill Cleanup |
Eliminate ignition sources. Ventilate area. Use absorbent material. Prevent entry to sewers. |
8. Handling, Storage & PPE
| Safe Handling |
Do not pierce or burn containers. Avoid contact with skin/eyes. No smoking. |
| Storage |
Store in a cool, dry, well-ventilated place. Keep under 50°C/122°F. Protect from sunlight. |
| PPE Requirements |
Chemical safety goggles, protective gloves, and fire-resistant clothing. Use NIOSH-approved SCBA if limits exceeded. |
9. Transport & Regulatory Information
| DOT / IMDG / IATA |
UN1950, Aerosols, flammable (each not exceeding 1 L capacity), Class 2.1 |
| TSCA Inventory |
Isopropyl alcohol (67-63-0) and Siloxanes (63148-62-9) are listed. |
| State Regulations |
Listed in NJ, PA, and MA Right-to-Know components. |
10. Disposal & Ecological Information
| Eco-Toxicity (Isopropanol) |
LC50 Pimephales promelas: 9640 mg/l (96 hrs) |
| Disposal Method |
Dispose of in accordance with local regulations. Do not puncture or incinerate containers. |
11. Disclaimer & Preparation Information
| Disclaimer |
Information is accurate to the best of our knowledge. No warranty is expressed or implied. The user is responsible for compliance with all regulations. |
| Prepared By |
Jessica Wilson (Prepared: 3-19-2025) |
