High Tech Alka HTAL-1

FOAMING, ALKALINE CONDENSER COIL CLEANER – High Tech Alka is a cost-competitive, heavy foaming alkaline condenser coil cleaner. Ideal when the price is the main subject of the conversation but still preforms in line with the best in the industry.

HIGH TECH ALKA

Powerful, Cost-Effective Coil Cleaning Solution   

HIGH TECH ALKA is a specialized coil cleaner designed to effectively remove oxides and grease from HVAC systems.Its heavy foaming, alkaline-based formula penetrates deep into coils, ensuring thorough cleaning and leaving them clean, bright, and smooth.   

Key Features and Benefits:

Removes Oxides and Grease: Effectively eliminates stubborn contaminants.  

  • Non-Acid Formula: Gentle on surfaces while providing powerful cleaning action.
  • Heavy Foaming Action: Ensures deep penetration and thorough cleaning.  
  • Cleans and Brightens Coils: Leaves coils looking their best.  
  • Cost-Competitive: Offers excellent value compared to other coil cleaners.

HIGH TECH ALKA is a reliable and effective coil cleaning solution that can be used on a variety of HVAC systems. Its powerful cleaning action, versatility, and cost-effectiveness make it an ideal choice for professionals and homeowners alike.

Part Number;                       Size
  • HTAL-1                                      1 gal 4/cs
Directions:

Effective Coil Cleaning for HVAC Systems

Before Use:
  • Consult SDS: Refer to the Safety Data Sheet (SDS) for detailed safety information.
  • Wear Protective Gear: Always wear goggles, gloves, and protective clothing.
Application:
  1. Power Off: Turn off the HVAC system.
  2. Dilute: Mix 1 part HIGH TECH ALKA with 4 parts water. Adjust the ratio based on the level of dirt and grime.
  3. Prepare Sprayer: Add water to a low-pressure tank sprayer, then add the diluted cleaner.
  4. Spray Coil: Spray the solution directly onto the coil, ensuring thorough saturation.
  5. Allow to Sit: Let the solution sit for 3-5 minutes, or longer for heavy grease.
  6. Rinse Thoroughly: Rinse the coils completely to remove any remaining solution and foam.

By following these steps, you can effectively clean your HVAC coils using HIGH TECH ALKA.

 

DANGERS & PRECAUTIONS

Read and understand the product’s label and Safety Data Sheet. Do not breathe mists. Wash hands thoroughly after handling. Provide adequate ventilation to keep the vapor concentration below TLV.

 

Contact Us

News and Updates

Subscribe on Youtube

Follow Us on Facebook 

 


 

SDS

⚠️ HIGH TECH ALKA SDS – DOWNLOAD

1. IDENTIFICATION & SUPPLIER DETAILS

Product Name High Tech Alka
Product Number HTAL-1, HTAL-5
Brand Vapco
Recommended Use Alkaline-based coil cleaner
Supplier Vapco Products, Inc.

401 Marshall Road

Valley Park, Missouri 63088 United States

Contact Information Telephone: (636) 923-2121 | Fax: (636) 923-3002 | Email: [email protected]
Emergency Phone (800) 255-3924 (ChemTel)

2. HAZARD IDENTIFICATION & COMPOSITION

GHS Classification Corrosive to metals (Cat 1); Skin corrosion/irritation (Cat 1); Eye damage/irritation (Cat 1)
Signal Word DANGER
Hazard Statements H290: May be corrosive to metals

H314: Causes severe skin burns and eye damage

Hazardous Components CAS No. Concentration
Sodium Hydroxide 1310-73-2 10 – 20 % (weight)
Silicic acid (H2SiO3), disodium salt 6834-92-0 1 – 10 % (weight)
C10-16-alkyl, oligomeric, D-glucopyranoside 110615-47-9 0.1 – 1 % (weight)
D-Glucopyranose, oligomeric, decyl octyl glycosides 68515-73-1 0.1 – 1 % (weight)

3. PHYSICAL & CHEMICAL PROPERTIES

Physical State & Appearance Liquid; Cloudy, light brown liquid
Odor Bland odor
pH 12.5 – 13.5
Melting/Freezing Point <32°F (0°C)
Solubility in Water Soluble
Vapor Pressure 23.8 mmHg at 77°F (25°C)
Relative Density 1.17 at 77°F (25°C)
Flammability Not considered flammable by OSHA

4. STABILITY & REACTIVITY

Chemical Stability Stable under normal conditions of use.
Reactivity Chemically active metals and strong acids. May be corrosive to metals.
Conditions to Avoid Chlorine-liberating material. Do not mix with bases, ammonia, or other compounds. Extreme temperatures.
Incompatible Materials Strong acids and chemically active metals.
Hazardous Decomposition Carbon oxide(s), sodium oxide(s), and silicone oxide(s).

5. TOXICOLOGICAL INFORMATION

Acute Effects Harmful if inhaled. Causes serious eye and skin irritation. Contact with liquid can cause permanent eye damage.
Skin Corrosion/Irritation Causes severe burns; prolonged contact will destroy tissue.
Chronic Health Hazards Skin disorders, drying and irritation. Dermatitis. Pulmonary edema and potential loss of sight.
Carcinogenicity Not classified.

6. FIRST-AID MEASURES

Inhalation Remove to fresh air. Keep at rest. Seek medical attention immediately.
Skin Contact Drench area with water for at least 15 minutes. Remove contaminated clothing. Obtain medical attention.
Eye Contact Rinse with water for at least 15 minutes. Remove contact lenses. Obtain medical attention immediately.
Ingestion Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

7. FIRE-FIGHTING & ACCIDENTAL RELEASE MEASURES

Extinguishing Media Water spray, fog, CO2, alcohol-resistant foam, dry chemical, or sand.
Firefighting Protection Wear NIOSH-approved SCBA with full body protective clothing.
Spill Cleanup Ventilate area. Contain spills with dikes or absorbents. Transfer to suitable container for disposal. Eliminate ignition sources.

8. HANDLING, STORAGE & PPE

Handling Procedures Avoid contact with skin and eyes. Do not breathe vapors/mist. Wash hands thoroughly after handling.
Storage Conditions Store locked up in a cool, dry, well-ventilated place. Keep in original corrosive resistant container. Protect from sunlight.
Personal Protective Equipment Chemical safety goggles, protective gloves (chemical resistant), and protective clothing. Use SCBA if exposure limits are exceeded.
Exposure Limits Sodium Hydroxide: PEL/REL/TWA 2 mg/m3

9. TRANSPORT & REGULATORY INFORMATION

UN Number UN1719
Proper Shipping Name Caustic alkali liquids, n.o.s. (Contains Sodium Hydroxide)
Hazard Class / Packing Group Class 8 / PG II
Regulatory Lists TSCA Inventory, MA Right to Know, NJ Right to Know, PA Right to Know.

10. DISPOSAL & ECOLOGICAL INFORMATION

Ecotoxicity Sodium Hydroxide: LC50 (96h) Gambusia affinis: 125 mg/l. Product is biodegradable.
Disposal Method Dispose of contents/container in accordance with local/national regulations. RCRA Waste: Characterize prior to disposal.

11. DISCLAIMER & PREPARATION INFORMATION

Prepared By Jessica Wilson
Preparation Date March 17, 2025
Disclaimer: To the best of our knowledge, information contained herein is accurate. However, there is no assumption of liability for the accuracy or completeness of the information. Final determination of suitability of any material is the sole responsibility of the user. The manufacturer will not be responsible for loss, injury, or expense arising out of the product’s improper use.