Mean Green MGA-1: Performance Engineered for Speed and Strength
Mean Green is Vapco’s premium Aggressive Tack High Solids Contact Adhesive designed for maximum application speed and superior yield on the job site.
The Aggressive Solvent Advantage: This formula employs a powerful Acetone/Heptane solvent system that delivers near-instant tack and a final bond that aggressively resists heat, cold, and moisture. This formula is deliberately non-Methylene Chloride (NO MECL), ensuring a high-performance system free from restricted solvents.
Highest Solids Content: Mean Green boasts the extremely high solids content, which means less solvent soaks into porous duct liner and more resin remains on the surface. By choosing this Aggressive Tack High Solids HVAC Contact Adhesive, contractors ensure maximum bond strength and coverage area, translating directly to maximum yield and cost savings.
Visual Quality Control: The adhesive’s signature Green color provides visual confirmation of full coverage on substrates. This visual assurance simplifies inspection and prevents costly rework.
| KEY FEATURE / SPECIFICATION |
TRADE BENEFIT / RESULT |
| Low VOC Content 40% – 50% |
While failing the 40% restriction in California, Mean Green does meet the standards of every other state for one of the most high strength aerosol spray adhesives on the market. |
| Non-Chlorinated Solvent Base |
Methylene Chloride-Free: Delivers high performance without using restricted, harmful chlorinated solvents. |
| Quick Flash-Off (Instant Tack) |
Rapid Installation: Fast-evaporating solvents minimize waiting time, accelerating project completion and improving crew efficiency. |
| Versatile Applications |
Forms strong bonds on Wood, Laminates, Vinyl, Fabric, Felt, Leather, Metals, in addition to Fiberglass, Bubble Wrap, Bubble Foil. |
| Competitive Thermal Stability
-20°F to 200°F |
All-Season Reliability: Bond is designed to resist high heat and cold, performing consistently across a wide service temperature range similar to leading high-performance HVAC adhesives. |
| Distinctive Green Color |
Visual Quality Control (QC): The green color allows for instant visual confirmation of 100% coverage on the substrate, eliminating costly misses and ensuring compliance. |
| Web / Lace Spray Pattern |
Zero Soak-In: Controlled pattern minimizes waste and ensures the adhesive remains on the material surface for a better bond, especially on porous fiberglass. |
| Aggressive Acetone/Heptane Solvents |
WARNING: This aggressive base will dissolve low-density Polystyrene/Styrofoam/EPS foam materials. Do not use on foam substrates. |
Part Number
Directions for Mean Green Aggressive Tack Sigh Solids Contact Adhesive:
Pre-Application Checklist
-
Warning: Do not use on Polystyrene, Styrofoam, or any EPS/XPS foam, as this aggressive solvent formula will dissolve the material.
-
Ensure both surfaces are clean, dry, and free of oil, dust, or grease.
-
Shake the can vigorously before use.
-
Maintain the optimal application temperature for the adhesive between between 60°F and 90°F (15°C and 32°C).
Application
-
Hold the can 6–10 inches from the surface. Spray in a sweeping, side-to-side motion for even coverage.
-
For Permanent Contact Bonding: Apply the wide Green Web Spray evenly to both surfaces to be joined. Allow a 30–60 second flash time for the fast-evaporating solvents to dissipate, then mate the surfaces and apply firm pressure.
-
For Temporary Bonds: Apply adhesive to one surface only and allow it to become fully tacky before applying the material.
-
Prevent Clogging: Immediately after use, invert the can and spray a few short bursts to clear the valve. Wipe away any adhesive buildup around the nozzle opening while wet.
Stop settling for slow-tacking, generic adhesives. Choose Mean Green (MGA-1): End bond failure and slow application. Choose the quickest contact adhesive engineered for Aggressive Tack, Highest Solids, and Visual Quality Control.
Trust Mean Green for fast, professional results.
Contact Us
News and Updates
Subscribe on Youtube
Follow Us on Facebook
SDS
MEAN GREEN AEROSOL SDS REV. 2
Safety Data Sheet – Mean Green Aerosol
Vapco Products, Inc.
Identification & Supplier Details (SDS Section 1)
| Product Information |
| Product Name / Identifier |
Mean Green Aerosol (MGA-1) / Brand: Vapco |
| Recommended Use |
Adhesive aerosol (Solvent-based contact adhesive) |
| Supplier Details |
| Name & Address |
Vapco Products, Inc. / 401 Marshall Road, Valley Park, Missouri 63088, United States |
| Contact Information |
Tel: (636) 923-2121 | Fax: (636) 923-3002 | Email: [email protected] |
| Emergency Phone Number |
(800) 255-3924 |
Hazard Identification & Composition (SDS Sections 2 & 3)
| Classification & Labeling |
| GHS Classification (OSHA) |
Flammable Aerosols Cat. 1, Gases under pressure (Liquefied Gas), Skin Corrosion/Irritation Cat. 2, Eye Damage/Irritation Cat. 2A, STOT-SE Cat. 3. |
| Signal Word / Pictograms |
Danger / |
| Hazard Statement(s) |
H222: Extremely flammable aerosol. H280: Contains gas under pressure; may explode if heated. H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation. |
| Key Precautionary Statements |
P210: Keep away from heat/sparks/open flames/hot surfaces. P251: Pressurized container: do not pierce or burn. P305+P351+P338: IF IN EYES: Rinse cautiously with water. P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. |
| Hazardous Component |
CAS No. |
Concentration (wt) |
| Acetone |
67-64-1 |
30 – 40 % |
| Heptane |
142-82-5 |
20 – 30 % |
| Petroleum gases, liquified, sweetened |
68476-86-8 |
20 – 30 % |
| Methyl Acetate |
79-20-9 |
1 – 10 % |
Physical & Chemical Properties (SDS Section 9)
| Property |
Value |
| Physical State / Appearance / Color |
Liquid / Aerosol spray / Green |
| Odor |
Solvent odor |
| Flammability |
Extremely flammable aerosol |
| Flash Point (Propellant estimated) |
-156°F (-104°C) |
| Boiling Point (Propellant estimated) |
-44°F (-42°C) |
| Vapor pressure |
46-75 psig at 20°C |
| Relative Density |
0.70 |
| Solubility / pH |
Insoluble in water / N/A |
Stability & Reactivity (SDS Section 10)
| Factor |
Condition / Material |
| Chemical Stability / Reactivity |
Stable under normal conditions of use. |
| Conditions to Avoid |
Extreme temperatures and incompatible materials. |
| Incompatible Materials |
Bases, oxidizing and reducing agents, phosphorus oxychloride, acids, caustics, alkalis, and some plastics. |
| Hazardous Decomposition Products |
Carbon oxide(s) and various hydrocarbons. |
Toxicological Information (SDS Section 11)
| Endpoint |
Summary / Key Effects |
| Acute Toxicity |
Harmful if inhaled. High concentrations may cause central nervous system depression, dizziness, and narcotic symptoms. |
| Skin Corrosion/Irritation |
Causes skin irritation. Contact may cause dermatitis and defatting. |
| Serious Eye Damage/Irritation |
Causes serious eye irritation, redness, tearing, and blurred vision. |
| STOT – Single Exposure |
May cause respiratory irritation, drowsiness or dizziness. |
| STOT – Repeated Exposure |
May cause damage to skin, eyes, and central nervous system through prolonged or repeated exposure. |
| Aspiration Hazard |
May be fatal if swallowed and enters airways. |
First-Aid Measures (SDS Section 4)
| Exposure Route |
Action Required |
| General Advice / Emergency (P312) |
If you feel unwell, Call a POISON CENTER/doctor. Show the label where possible. |
| Inhaled (P304+P340) |
Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention. |
| Skin Contact (P302+P352) |
Wash with plenty of water. Remove contaminated clothing. If irritation persists, get medical advice. |
| Eye Contact (P305+P351+P338) |
Rinse cautiously with water for several minutes. Remove contact lenses. If irritation persists, get medical attention. |
| Swallowed |
Rinse mouth. Do NOT induce vomiting. Obtain medical attention. |
Fire-Fighting & Accidental Release Measures (SDS Sections 5 & 6)
| Measure Type |
Details |
| Suitable Extinguishing Media |
Dry chemical, foam, or carbon dioxide (CO2). |
| Specific Hazards |
Extremely flammable aerosol. Container may explode in heat of fire (Pressure buildup). Vapors are heavier than air and may flash back. |
| Fire-Fighting Instructions |
Do NOT fight fire when fire reaches containers. Fight remotely. Shut off all ignition sources. Use water for cooling exposed containers. |
| Accidental Release Precautions (P210) |
Eliminate ignition sources first. Do not breathe vapors/gas. Evacuate and ventilate the area. |
| Containment & Clean-up |
Ventilate the area. Isolate spill area. Take up liquid spill into absorbent material. Avoid release to the environment/sewers. |
Handling, Storage & PPE (SDS Sections 7 & 8)
| Area / Equipment |
Requirements / Controls |
| Safe Handling Precautions (P211, P264) |
Do not spray on open flame. Wash hands before eating, drinking or smoking. Use only outdoors or in a well-ventilated area. |
| Storage Conditions (P410+P412) |
Store in a dry, cool, well-ventilated place away from ignition sources. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. |
| Exposure Limits (Acetone) |
OSHA PEL: 1000 ppm (2400 mg/m3) | NIOSH REL: 250 ppm |
| Exposure Limits (Heptane) |
OSHA PEL: 500 ppm (2000 mg/m3) | NIOSH REL: 85 ppm (TWA) |
| Eye/Face Protection (P280) |
Chemical safety goggles. |
| Skin/Body Protection (P280) |
Wear protective gloves (chemical resistant materials) and fire/flame resistant/retardant clothing. |
Transport & Regulatory Information (SDS Sections 14 & 15)
| Transport Mode |
UN Number |
Class (PG) |
Proper Shipping Name |
| DOT (US) / IMDG / IATA |
UN1950 |
2.1 (N/A) |
Aerosols, flammable, (each not exceeding 1 L capacity) |
| U.S. Regulatory Information (State/TSCA) |
| State Right-to-Know Components |
Acetone (67-64-1), Heptane (142-82-5), and Methyl Acetate (79-20-9) are listed in MA, NJ, and PA. |
| TSCA Inventory Status |
All chemical components are listed or exempt. |
Disposal & Ecological Information (SDS Sections 13 & 12)
| Area |
Guidance |
| Product Disposal (P501) |
Dispose of contents/container in accordance with local, regional, national, and international regulations. Do not pierce or burn. |
| Sewage Disposal / Ecological Hazard |
Avoid release into the environment. This material is hazardous to aquatic life. Keep out of sewers and waterways. |
| Persistence, Degradability, etc. |
No data available for persistence, degradability, bioaccumulative potential, or mobility in soil. |
Disclaimer & Preparation Information (SDS Section 16)
Disclaimer:
To the best of our knowledge, information contained herein is accurate. However there is no assumption of liability for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazard which exists. The information contained in this SDS was obtained from current and reliable sources; however, the data is provided without warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond the control of the manufacturer, the manufacturer will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this SDS shall be created or inferred by any statement in this SDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this SDS. The user is responsible for full compliance with all government regulations.
N/A = Not applicable; N/D = Not determined
Prepared by: Jessica Wilson, Date prepared: 6/4/2025
Technical Data
Field Guide: Substrate Compatibility Matrix
Mean Green’s Aggressive Tack High Solids Formula ensures reliable performance on demanding surfaces while providing near-instant tack.
| SUBSTRATE A |
SUBSTRATE B |
BOND TYPE |
PERFORMANCE / WHY IT WORKS |
| Fiberglass Duct Liner / Duct Board |
Galvanized Steel / Aluminum |
Permanent |
Highest Solids content resists soaking into porous substrates, ensuring maximum surface resin load. |
| Polyethylene Bubble-Wrap / Bubble-Foil |
Sheet Metal / Vinyl / Wood |
Permanent |
The **Aggressive Tack** provided by the Acetone/Heptane blend creates a strong chemical bite on plastics. |
| Rubber Sheeting / Urethane / Cardboard |
Metal / Wood / Paper |
Permanent / Temporary |
The bond is highly flexible and accommodates thermal movement; ideal for rubber and flexible materials. |
| Vinyl Fabrics / Leather / Felt |
Vehicle Headliners / Upholstery Foam |
Permanent |
Fast flash-off minimizes solvent attack on vinyls; maintains high shear strength for tensioned fabrics. |
| Polystyrene / Styrofoam (EPS/XPS) |
Any Substrate |
NOT COMPATIBLE |
WARNING: The Acetone/Heptane solvent base will chemically dissolve low-density EPS/XPS foam materials. Do NOT use. |
1. Physical & Chemical Properties
| PROPERTY |
SPECIFICATION |
| VOC Content |
40% – 54% |
| Solvent Type |
Acetone, Heptane (No Methylene Chloride) |
| Color / Appearance |
Green (Green Web Spray) |
| Solids Content (by weight) |
25% – 45% |
| Service Temperature Range |
-20°F to 200°F (-29°C to 93°C) |
| Adhesive Base / Resin System |
Synthetic Rubber / Proprietary Poly-Tack Blend |
2. Application & Performance Metrics
| METRIC |
PERFORMANCE DATA |
| Flash Time (Required Wait Time) |
30 – 60 Seconds (Near-instant adhesion for rapid production) |
| Open Time (Working Window) |
Up to 10 Minutes (Fast evaporation window) |
| Cure Time (Full Structural Strength) |
24 Hours |
| Est. Coverage Rate (Double-Coat) |
~150 square feet per can |
| Cleanup Solvent |
Mineral Spirits or Lacquer Thinner (While wet) |
3. Logistics & Compliance Checklist
| ITEM |
DETAILS / CLASSIFICATION |
| California Proposition 65 |
**Prop 65 Chemical Free** (Formula contains no known California Prop 65-listed substances) |
| UN Number / Shipping Name |
UN1950, Aerosols, Flammable, 2.1 |
| Shipping Classification (Ground) |
ORM-D / Limited Quantity (Ltd Qty) |
| Compliance |
Sales Restriction Warning: Not for sale in California. Please consult your local regulatory codes for availability. |
| Case Quantity / Weight |
6 Cans per Case (12 ounces net weight) |
| Shelf Life |
2 Years from Manufacture Date (Stored below 122F) |
4. Estimated Structural Performance Data*
| METRIC (ASTM Type) |
LAB ESTIMATED VALUE |
| Peel Strength (180° Peel) (Aluminum to Fiberglass) |
18 – 22 PIW (Pounds per Inch Width) |
| Shear Strength (Static Load) (Aluminum to Aluminum) |
> 125 PSI (Pounds per Square Inch) |
| Adhesion Failure Mode (Typical) |
Substrate Failure (Adhesive bond exceeds strength of low-density materials) |
*Vapco has not run certified laboratory tests (e.g., ASTM) to verify these specific metrics. Performance will vary based on application technique, substrate material composition, temperature, humidity, and curing conditions.
