Gallon jug of QUAD POWER, a powerful concentrated HVACR cleaning solution for coils, condensers, and other equipment.

Quad Power Gallon QP-1

QUAD POWER is a powerful, highly concentrated, and cost-effective cleaning solution for HVACR contractors. This versatile formula effectively removes stubborn grease, grime, and dirt from coils, condensers, mini-splits, and more, restoring equipment to its optimal performance.

QUAD POWER GALLON

Versatile and Powerful Cleaning Solution

QUAD POWER is a highly concentrated, cost-effective cleaning solution available in various sizes to meet your needs.This powerful formula effectively removes grease, grime, and dirt from a wide range of surfaces, making it an essential tool for HVACR contractors and their clients.

Key Features and Benefits:

Versatile Applications: Cleans microchannels, mini splits, air-cooled condensers, evaporator coils, permanent filters, fan blades, motors, and other equipment.
Powerful Cleaning Action: Removes stubborn grease, grime, and dirt.
Deodorizing Properties: Eliminates unpleasant odors.
Safe and Effective: Safe for use on rubber, membrane, and metal roofs.
NSF Approved: Meets NSF standards for safety and effectiveness.

QUAD POWER is available in multiple formats, including a pre-mixed gallon bottle, a spray bottle, an aerosol spray,and a 5-gallon jug. Choose the size that best suits your needs.

Experience the power of QUAD POWER and restore your equipment to its optimal performance.

Part Number; Size

QP-1 1 gallon

Directions:

Effective Cleaning for HVAC Systems

General Precautions:

Wear Protective Gear: Always wear goggles, gloves, and protective clothing.
Turn Off System: Shut down the HVAC system before cleaning.

Condensers:

Dilute: Mix 4 parts water with 1 part QUAD POWER.
Prepare Sprayer: Add water and cleaner to the sprayer.
Spray Coil: Spray the solution onto the dirty surface.
Soak: Let the solution sit for 5-7 minutes.
Rinse: Rinse with water.
Clean Sprayer: Rinse out the sprayer, wand, and nozzle.
Repeat: For extremely dirty coils, consider a second application.

Evaporators/Mini Splits/Micro Channels:

Dilute: Mix 10 parts water with 1 part QUAD POWER.
Spray and Soak: Apply the solution to the dirty surface and let it soak for 5-10 minutes.
Resume Operation: Return the system to operation. Condensation will rinse away the solution.
Clean Sprayer: Rinse out the sprayer, wand, and nozzle.
Repeat: For extremely dirty coils, consider a second application.

Permanent Filters:

Prepare Solution: For every gallon of water, add 1 ounce of QUAD POWER.
Soak: Soak the greasy components in the solution for at least 15 minutes.
Rinse: Rinse with water.

Quad Power Aerosol:

Wear Protective Gear: Ensure you’re wearing goggles, gloves, and protective clothing.
Shake Can: Shake the canister well.
Spray: Remove the cap and spray the solution onto the surface.
Wait: Allow the foam to liquefy for 5-10 minutes.
Rinse: Rinse the surface with water.

Note on Roofing Materials:

Test Before Cleaning: Due to potential effects on color and finish, test QUAD POWER on a small area of the roof before cleaning.
Rubber Roofs: QUAD POWER is generally safe for rubber and membrane roofs, but test on a small area first.

By following these directions, you can effectively clean and maintain your HVAC system using QUAD POWER.

DANGERS & PRECAUTIONS:

Do not get in eyes, on the skin, or on clothing. Avoid breathing dust/fume/ gas/mist/vapors/spray. Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection/face protection.

News and Updates

Subscribe on Youtube

SDS

QUAD POWER LIQUID SDS – Download

SAFETY DATA SHEET

QUAD POWER LIQUID

1. Identification & Supplier Details

Product Identification (Section 1.1)
GHS Product Identifier (Product Name)	Quad Power Liquid
Product Number(s)	QP-1, QP-5, QP-55
Brand	Vapco

Recommended Use (Section 1.3)
Recommended Use	Cleaner
Restrictions on Use	N/A (Not Specified)

Supplier Details & Emergency Contact (Section 1.4 & 1.5)
Supplier Name	Vapco Products, Inc.
Supplier Address	401 Marshall Road Valley Park, Missouri 63088, United States
Telephone	(636) 923-2121
Fax	(636) 923-3002
Email	[email protected]
Emergency Phone Number	(800) 255-3924

2. Hazard Identification & Composition

GHS Classification (Section 2.1)
Category	Classification
Acute Toxicity, Oral	Cat. 4
Eye Damage/Irritation	Cat. 1
Skin Corrosion/Irritation	Cat. 1

GHS Label Elements (Section 2.2)
Signal Word	Danger
Pictograms	[Image of GHS Pictogram for Corrosion and GHS Pictogram for Exclamation Mark]
Hazard Statement(s)	H302: Harmful if swallowed H314: Causes severe skin burns and eye damage
Precautionary Statement(s)	Prevention: P260, P264, P270, P280 Response: P301+P312, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P330, P363 Storage: P405 Disposal: P501

Hazardous Components (Section 3.2)
Chemical Name	CAS Number	Concentration (weight %)
2-Butoxyethanol	111-76-2	1 – 10 %
Potassium Hydroxide	1310-58-3	1 – 10 %
Dodecylbenzenesulfonic acid, sodium salt	68081-81-2	1 – 10 %
Sodium xylenesulfonate	1300-72-7	0.1 – 1 %

3. Physical & Chemical Properties

Basic Physical and Chemical Properties (Section 9)
Physical State	Liquid
Appearance / Color	Clear liquid / Orange
Odor / Odor Threshold	Citrus / N/D
pH	12-14
Melting Point/Freezing Point	32°F (0°C) estimated
Boiling Point or Boiling Range	212°F (100°C) estimated
Flash Point	None through boiling
Flammability (Solid, Gas)	N/D
Lower/Upper Explosion Limit	N/D
Auto-Ignition Temperature	N/D
Decomposition Temperature	N/D
Vapor Pressure	17.5 mmHg at 20 °C (Water)
Relative Vapor Density	> 1 (Air=1)
Density and/or Relative Density	1.03-1.05
Solubility	Completely soluble in water
Partition Coefficient n-octanol/water (log value)	N/D
Evaporation Rate	Same as water
Kinematic Viscosity	N/D

4. Stability & Reactivity

Reactivity and Stability (Section 10)
Reactivity	Reacts strongly with strong acids. This product may react with oxidizing agents. Stable under recommended storage conditions.
Chemical Stability	Stable under recommended storage conditions.
Possibility of Hazardous Reactions	None under normal use conditions.
Conditions to Avoid	Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.
Incompatible Materials	Strong acids and alkalis, or oxidizing agents.
Hazardous Decomposition Products	Carbon oxides, potassium oxides, and fumes.

5. Toxicological Information

Information on Toxicological Effects (Section 11)
Acute Toxicity (ATE)	Oral ATE (mixture): 1666.67 mg/kg bw. Gas Inhalation ATE (mixture): 45000 ppmV.
Acute Toxicity (Component LD50/LC50)	2-Butoxyethanol: LD50 Oral (Rat) – 880 mg/kg; LD50 Skin (Rabbit) – 1,060 mg/kg. Potassium Hydroxide: LD50 Oral (Rat) – 333 mg/kg. Dodecylbenzene sodium sulfonate: LD50 Oral (Rat) – 1090 mg/kg.
Skin Corrosion/Irritation	Causes skin irritation. Causes severe burns, prolonged contact will destroy tissue.
Serious Eye Damage/Irritation	Causes severe burns, irritation, redness, tearing, and pain. Contact with gas/liquid can cause permanent eye damage.
Respiratory or Skin Sensitization	May cause irritation (possible severe), chemical burns, upper respiratory damage, and pulmonary edema.
Carcinogenicity	No component is present at levels ≥ 0.1% that can be identified as a probable, possible or confirmed human carcinogen.
Reproductive Toxicity / Mutagenicity	Does not contain any known or suspected reproductive hazards. Not a germ cell mutagen.
Aspiration Hazard	The ATE (gas inhalation) of the mixture is: 45000 ppmV.

6. First-Aid Measures

Description of Necessary First-Aid Measures (Section 4.1)
General Advice	Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice.
If Inhaled	Remove person to fresh air. Keep comfortable for breathing. Get medical advice/attention.
In Case of Skin Contact	Immediately drench affected area with water for at least 15 minutes. Take off immediately all contaminated clothing. Obtain medical attention if irritation develops or persists.
In Case of Eye Contact	Immediately rinse cautiously with water for several minutes (at least 15 minutes). Remove contact lenses if present. Continue rinsing. Obtain medical attention if irritation develops or persists. Immediately call a POISON CENTER/doctor.
If Swallowed	Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER/doctor if you feel unwell. Obtain medical attention.

Immediate Medical Attention & Special Treatment (Section 4.3): Call for immediate medical attention. Continue flushing (chemical burns) during transportation to medical care. Keep victim under observation (symptoms may be delayed). The absence of visible signs of burns does not reliably exclude actual tissue damage.

7. Fire-Fighting & Accidental Release Measures

Fire-Fighting Measures (Section 5)
Suitable Extinguishing Media	Water spray, fog, carbon dioxide (CO₂), alcohol-resistant foam, dry chemical, or sand. Use appropriate media for surrounding fire.
Specific Hazards / Reactivity	Stable under recommended storage conditions. May be corrosive to metals. Increased risk of fire or explosion.
Hazardous Combustion Products	Sodium oxide(s), silicon oxide(s).
Protection During Firefighting	Wear NIOSH-approved Self-Contained Breathing Apparatus (SCBA) with full face piece and full body protective clothing. Do NOT fight fire when fire reaches containers.

Accidental Release Measures (Section 6)
Personal Precautions/PPE	Do not get in eyes, on skin, or on clothing. Do not breathe vapors. Keep away from heat/ignition sources. Use appropriate PPE.
Environmental Precautions	Do not allow material to contaminate ground water system or enter drains. Report spills as required.
Containment & Clean Up Methods	Ventilate the area. Contain spills with dikes or absorbents to prevent entry into sewers/streams. Eliminate all ignition sources. Take up liquid spill into absorbent material.

8. Handling, Storage & PPE

Precautions for Safe Handling (Section 7.1)
Precautions for Safe Handling	Do not handle until all safety precautions have been read and understood. Avoid contact with skin, eyes and clothing. Do not breathe vapors. Wash hands thoroughly after handling.
Additional Hazards When Processed	Do not pressurize, cut, or weld containers. Pressurized container: May burst if heated. Do not pierce or burn.

Conditions for Safe Storage (Section 7.2)
Storage Conditions	Store locked up/in a secure area. Store in a dry, cool, well-ventilated place away from ignition sources. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Incompatible Materials	Strong acids and alkalis, or oxidizing agents.

Individual Protection Measures (PPE) (Section 8.3)
Appropriate Engineering Controls	Emergency eye wash fountains and safety showers should be available. Ensure adequate ventilation. Use explosion-proof equipment.
Eye/Face Protection	Chemical safety goggles.
Skin/Body Protection	Wear protective gloves (chemical resistant) and clothing. Wear fire/flame resistant/retardant clothing.
Respiratory Protection	Use a NIOSH-approved Self-Containing Breathing Apparatus whenever exposure may exceed established Occupational Exposure Limits.

9. Transport & Regulatory Information

Transport Information (Section 14)
Regulation	UN Number	Class / PG	Proper Shipping Name
DOT (US)	UN3266	8 / I	Corrosive liquid, basic, inorganic, n.o.s.
IMDG	UN3266	8 / I	Corrosive liquid, basic, inorganic, n.o.s.
IATA	UN3266	8 / I	Corrosive liquid, basic, inorganic, n.o.s.

Regulatory Information (Section 15)
SARA 311/312 Hazards	Fire Hazard, Acute Health Hazard, Chronic Health Hazard
SARA 313 Components	Ethylene glycol monobutyl ether (CAS: 111-76-2)
California Prop. 65	This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
US EPA TSCA Public Inventory	All hazardous components (2-Butoxyethanol, Potassium Hydroxide, Dodecylbenzenesulfonic acid sodium salt, Sodium xylenesulfonate) are listed.

10. Disposal & Ecological Information

Ecological Information (Section 12)
Toxicity (Component LC50/EC50)	2-Butoxyethanol: LC50 (Rainbow Trout) – 1,474 mg/l – 96 h; EC50 (Daphnia magna) – 1,550 mg/l – 48 h. Potassium Hydroxide: LC50 (Mosquito fish) – 80 mg/l – 96 h.
Persistence and Degradability	No information is available.
Bioaccumulative Potential (Log Pow)	2-Butoxyethanol: 0.81. Potassium hydroxide: 0.83. (Low potential)
Mobility in Soil	This product is mobile in soil.

Disposal Considerations (Section 13)
Product Disposal / Waste Treatment	This material is a hazardous waste according to federal regulations (U.S. EPA 40 CFR 261). Dispose of contents/container in accordance with local, regional, national, and international regulations.
Other Disposal Recommendations	Container may remain hazardous when empty. Do not puncture or incinerate container. Product should be fully characterized prior to disposal.

11. Disclaimer & Preparation Information

Preparation Information (Section 16.2)
Prepared by	Jessica Wilson
Date Prepared	2-20-2025

HMIS and NFPA Ratings
Rating Type	Health	Flammability	Physical/Instability Hazard
HMIS (Personal Protection: B)	2	0	1
NFPA	(Not explicitly listed, but implied 2 or 3 based on hazards)	(Not explicitly listed, but implied 0)	(Not explicitly listed, but implied 1)

Disclaimer (Section 16.1):

To the best of our knowledge, information contained herein is accurate. However there is no assumption of liability for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. The information contained in this SDS was obtained from current and reliable sources; however, the data is provided without warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond the control of the manufacturer, the manufacturer will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this SDS shall be created or inferred by any statement in this SDS. The user is responsible for full compliance with various government agency regulations.

Key: N/A = Not applicable; N/D = Not determined