Zinc Spray

ZINC SPRAY – is a high solids, zinc-rich coating that forms an electrolytic bond on metal surfaces and prevents the formation of rust and corrosion. Prevents further damage and stops creep-age in areas where rusting has already occurred. It provides a cold applied coating which equals the performance of hot-dip galvanize treatments. Resists abrasion and large temperature fluctuations.

ZINC SPRAY

Powerful Corrosion Protection for Metal Surfaces

ZINC SPRAY is a high-quality zinc-rich coating designed to prevent rust and corrosion on metal surfaces. Its advanced formula forms an electrolytic bond, providing superior protection against the elements.

Key Features and Benefits:
  • Stops Rust and Corrosion: Protects metal surfaces from the damaging effects of rust and corrosion.
  • 68% Zinc Content: Offers exceptional corrosion resistance.
  • Ideal for Iron and Steel: Specifically formulated for use on these metals.
  • Prevents Further Damage: Stops the spread of rust and corrosion in affected areas.
  • Cold-Applied Coating: Provides the performance of hot-dip galvanizing without the need for heat.
  • Resists Abrasion and Temperature Fluctuations: Durable and long-lasting.

ZINC SPRAY is a reliable and effective solution for protecting metal surfaces from rust and corrosion. Its advanced formula and superior performance make it an ideal choice for professionals and homeowners alike.

Part Number;                  Size
  • ZS-1                                    16 oz 12/cs
Directions:

Effective Application for Rust and Corrosion Protection

  1. Shake Vigorously: Shake the can vigorously before and during use to ensure the zinc particles are evenly suspended.
  2. Prepare Surface: Ensure the surface is clean and free from rust, oil, grease, and old paint.
  3. Maintain Distance: Spray from a distance of at least 10 inches to ensure even application.
  4. Apply in Sweeping Motions: Use a sweeping motion to cover the surface evenly.
  5. Dry Time: Allow the coating to dry for approximately 15 minutes before touching.
  6. Painting: The coating can be painted over after six hours of drying.
  7. Curing Time: Allow 24-48 hours for the coating to fully cure.
  8. Multiple Thin Coats: Apply several thin coats for optimal protection instead of one thick coat.
  9. Prevent Clogging: After each use, invert the can and spray a few short bursts to clear the valve.

By following these directions, you can effectively apply ZINC SPRAY for superior rust and corrosion protection.

 

DANGERS & PRECAUTIONS:

Read and understand the product’s label and Safety Data Sheet. Extremely flammable aerosol. Contains gas under pressure: May explode if heated. It causes skin and serious eye irritation. May cause drowsiness and dizziness. May be fatal if swallowed and enters airways. Sensitive to static charge. Keep out of reach of children. Keep away from sparks, open flames, and hot surfaces. No smoking. Do not spray on an open flame or other ignition sources. Use only outdoors or in a well-ventilated area. Wear safety glasses and chemical resistant gloves when using the product. Wash hands thoroughly after handling. Do not breathe vapors. Do not eat, drink, or smoke while using the product.

 

Contact Us

News and Updates

Subscribe on Youtube

Follow Us on Facebook 


 

SDS

TDR