Vapco Products, Inc.
Safety Data Sheet
Coat IT Cleanup

SECTION 1: Identification

1.1 GHS Product identifier
Product name: Coat IT Cleanup
Product number: CIR-16OZ
Brand: Vapco

1.3 Recommended use of the chemical and restrictions on use
Coating remover

1.4 Supplier’s details
Name: Vapco Products, Inc.
Address: 401 Marshall Road, Valley Park, Missouri 63088, United States
Telephone: (636) 923-2121
Fax: (636) 923-3002
email: [email protected]

1.5 Emergency phone number
(800) 255-3924

SECTION 2: Hazard identification

2.1 Classification of the substance or mixture
GHS classification in accordance with: OSHA (29 CFR 1910.1200, 2012)
– Acute toxicity, inhalation, Cat. 4
– Eye damage/irritation, Cat. 2A
– Flammable liquids, Cat. 2
– Specific target organ toxicity (single exposure), Cat. 3

2.2 GHS label elements, including precautionary statements
Signal word: Warning

Hazard statement(s)
H225 Highly flammable liquid and vapor
H319 Causes serious eye irritation
H332 Harmful if inhaled
H336 May cause drowsiness or dizziness

Precautionary statement(s)
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P337+P313 If eye irritation persists: Get medical advice/attention.
P370+P378 In case of fire: Use appropriate media to extinguish.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to the specifications of local, regional, national, and international regulations.

SECTION 3: Composition/information on ingredients

3.2 Mixtures

Hazardous components	CAS no.	Concentration
1. Trans-1,2-dichloroethylene (EC no. 205-860-2; Index no. 602-026-00-3)	156-60-5	60 – 80 % (weight)
2. Ethanol (EC no. 200-578-6; Index no. 603-002-00-5)	64-17-5	10 – 30 % (weight)
3. Acetone (EC no. 200-662-2; Index no. 606-001-00-8)	67-64-1	5 – 15 % (weight)

SECTION 4: First-aid measures

4.1 Description of necessary first-aid measures
General advice: Never give anything by mouth to an unconscious person.If you feel unwell, seek medical advice (show the label where possible).
If inhaled: First, take proper precautions to ensure your own safety before attempting rescue (e.g. wear appropriate respiratory protective equipment, use the buddy system), then remove the exposed person to fresh air.Keep at rest in a position comfortable for breathing. Get medical advice/attention.
In case of skin contact: Immediately drench affected area with water for at least 15 minutes. Remove contaminated clothing immediately.Obtain medical attention if irritation develops or persists.
In case of eye contact: Immediately rinse with water for at least 15 minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if irritation develops or persists.
If swallowed: Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

4.2 Most important symptoms/effects, acute and delayed
Symptoms/Injuries: Harmful if inhaled.Causes serious eye irritation. May cause drowsiness and dizziness.Asphyxia by lack of oxygen: risk of death.May cause frostbite on contact with the liquid.
Symptoms/Injuries After Inhalation: High concentrations may cause central nervous system depression such as dizziness, vomiting, numbness, drowsiness, headache, and similar narcotic symptoms.Inhalation is likely to cause adverse health effects including, but not limited to: irritation, difficulty breathing, and unconsciousness.In elevated concentrations, may cause asphyxiation, central nervous system effects, and increased breathing rate.Symptoms of asphyxiation include headache, dizziness, rapid breathing, increased pulse, mood changes, tremors, cyanosis, muscular weakness, narcosis, numbness of the extremities, unconsciousness and death.This product contains chlorinated solvent material, which is associated with cardiac sensitization following very high exposures or with concurrent exposure to high stress levels or heart-stimulating substances.Careful consideration should be applied preceding administration of epinephrine or similar heart-stimulating substances.
Symptoms/Injuries After Skin Contact: Contact with liquid escaping the container can cause frostbite and freeze burns.Symptoms/Injuries After Eye Contact: Contact causes severe irritation with redness and swelling of the conjunctiva.Contact with liquid escaping the container can cause frostbite, freeze burns, and permanent eye damage.
Symptoms/Injuries After Ingestion: Not considered a potential route of exposure, but contact with liquid escaping the container can cause freeze burns and frostbite.Chronic Symptoms: None known.

4.3 Indication of immediate medical attention and special treatment needed, if necessary
If exposed or concerned, get medical advice and attention.If medical advice is needed, have product container or label at hand.

SECTION 5: Fire-fighting measures

5.1 Suitable extinguishing media
Water spray, fog, carbon dioxide (CO2), alcohol-resistant foam, dry chemical, or sand.Use appropriate media for surrounding fire.

5.2 Specific hazards arising from the chemical
Explosion Hazard: Container may explode in heat of fire.Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries.Vapors are heavier than air and may travel considerable distance to an ignition source and flash back to source of vapors.
Reactivity: Reacts violently with strong oxidizers. Increased risk of fire or explosion.Certain mixtures of chlorinated solvent may be flammable or reactive under certain conditions.

5.3 Special protective actions for fire-fighters
Precautionary Fire Measures: Exercise caution when fighting any chemical fire.
Firefighting Instructions: Use dry chemical, foam, or carbon dioxide (CO2).Do not breathe fumes from fire or vapors from decomposition.Do NOT fight fire when fire reaches containers. Evacuate area. Fight fire remotely due to the risk of explosion.Shut off all sources of ignition. Use water spray or fog for cooling exposed containers.
Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.Wear NIOSH-approved Self-Contained Breathing Apparatus with a full face piece operated in a positive pressure demand mode with full body protective clothing when fighting fires.
Hazardous Combustion Products: Carbon oxide(s), chlorine compounds, hydrogen chloride.

Further information
Do not allow run-off from fire fighting to enter drains or water courses.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
General Measures: Do not get in eyes, on skin, or on clothing.Do not breathe vapors, spray, mist, gas. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources.No smoking.
For Non-Emergency Personnel Protective Equipment: Use appropriate personal protective equipment (PPE).Emergency Procedures: Evacuate unnecessary personnel. Stop leak if safe to do so.
For Emergency Personnel Protective Equipment: Equip cleanup crew with proper protection.Emergency Procedure: Eliminate ignition sources first, then ventilate the area. Evacuate unnecessary personnel, isolate, and ventilate area.Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

6.2 Environmental precautions
Prevent entry to sewers and public waters. Avoid release to the environment.

6.3 Methods and materials for containment and cleaning up
For Containment: Ventilate the area.Contain any spills with dikes or absorbents to prevent further migration and entry into sewers or streams.As an immediate precautionary measure, isolate spill or leak area in all directions.
Methods for Cleaning Up: Clean up spills immediately and dispose of waste safely. Eliminate all ignition sources. Ventilate area.Stop the ignition source of the release, if safe to do so.Consider the use of water spray to disperse vapors. Isolate the area until gas has dispersed.Ventilate and gas test area before entering. Take up liquid spill into absorbent material.Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill.
Waste Disposal: Dispose of in accordance with local, regional, national, and international regulations. Containers may be hazardous when empty.Do not flame cut, braze, or weld. Product should be fully characterized prior to disposal (40 CFR 261).

Reference to other sections
See Section 8 for exposure controls and personal protection and Section 13 for disposal considerations.

SECTION 7: Handling and storage

7.1 Precautions for safe handling
Additional Hazards When Processed: Do not pressurize, cut, or weld containers.Ruptured cylinders may rocket. Pressurized container: May burst if heated. Do not pierce or burn, even after use.
Precautions for Safe Handling: Do not handle until all safety precautions have been read and understood.Avoid contact with skin, eyes and clothing. Do not breathe gas, mist, spray, vapors.Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.Do not spray on open flame or other ignition source.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures.
Other Precautions: Keep out of reach of children.Follow label instructions. Vapors may collect in low lying areas.

7.2 Conditions for safe storage, including any incompatibilities
Technical Measures: Comply with applicable regulations.Proper grounding procedures to avoid static electricity should be followed.
Storage Conditions: Store in a dry, cool place.Keep only in the original container in a cool, well-ventilated place away from ignition sources. Protect from sunlight.Do not expose to temperatures exceeding 50°C/122°F. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials.Store locked up/in a secure area.
Incompatible Materials: Strong acids, strong bases, strong oxidizers. Chlorine. Finely divided metals. Magnesium. Alkaline earth metals.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters
1. Ethanol (CAS: 64-17-5)
TWA [Ethyl alcohol] (Inhalation): 1000 ppm; 1880 mg/m3; AU (AU/SWA)
PEL [Ethyl alcohol (Ethanol)] (Inhalation): 1000 ppm; US (US/OSHA) OSHA Annotated Table Z-1, www.osha.gov
PEL [Ethyl alcohol (Ethanol)] (Inhalation): 1900 mg/m3; US (US/OSHA) OSHA Annotated Table Z-1, www.osha.gov
PEL [Ethyl alcohol (Ethanol)] (Inhalation): 1000 ppm; US (Cal/OSHA) OSHA Annotated Table Z-1, www.osha.gov
REL [Ethyl alcohol (Ethanol)] (Inhalation): 1000 ppm; US (NIOSH) OSHA Annotated Table Z-1, www.osha.gov

2. Acetone (CAS: 67-64-1)
TWA (Inhalation): 500 ppm; 1185 mg/m3; AU (AU/SWA)
STEL (Inhalation): 1000 ppm; 2375 mg/m3; AU (AU/SWA)
IOELV-LTEL (Inhalation): 1210 mg/m3; EU (EU/OSHA) List no. 1 under Council Directive 98/24/EC as amended. List last updated on 8/29/2023.
IOELV-LTEL (Inhalation): 500 ppm; EU (EU/OSHA) List no. 1 under Council Directive 98/24/EC as amended. List last updated on 8/29/2023.
PEL (Inhalation): 1000 ppm; US (US/OSHA) OSHA Annotated Table Z-1, www.osha.gov
PEL (Inhalation): 2400 mg/m3; US (US/OSHA) OSHA Annotated Table Z-1, www.osha.gov
PEL (Inhalation): 500 ppm, (ST) 750 ppm, (C) 3000 ppm; US (Cal/OSHA) OSHA Annotated Table Z-1, www.osha.gov
REL (Inhalation): 250 ppm; US (NIOSH) OSHA Annotated Table Z-1, www.osha.gov

8.2 Appropriate engineering controls
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.Ensure adequate ventilation, especially in confined areas. Use explosion-proof equipment. Proper grounding procedures to avoid static electricity should be followed.Use only outdoors or in well-ventilated area. Ensure all local, regional, national, and international regulations are being observed.Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.

8.3 Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection: Chemical safety goggles. Insufficient ventilation: wear respiratory protection.Respiratory protection of the dependent type.
Skin protection: Wear protective gloves and clothing.
Body protection: Wear suitable protective clothing. Wear protective gloves.Chemical resistant materials and fabrics. Wear fire/flame resistant/retardant clothing.
Respiratory protection: Use a NIOSH-approved Self-Containing Breathing Apparatus whenever exposure may exceed established Occupational Exposure Limits.

SECTION 9: Physical and chemical properties

Physical state	Liquid
Appearance	Clear liquid
Color	Colorless
Odor	Sweet chlorinated solvent
Odor threshold	N/D
Melting point/freezing point	N/D
Boiling point or initial boiling point and boiling range	N/D
Flammability	Considered to be a flammable liquid by OSHA (29 CFR 1910.1200)
Lower and upper explosion limit/flammability limit	N/D
Flash point	N/D
Auto-ignition temperature	N/D
Decomposition temperature	N/D
pH	N/A
Kinematic viscosity	N/D
Solubility	N/D
Partition coefficient n-octanol/water (log value)	N/D
Vapor pressure	N/D
Evaporation rate	Fast
Density and/or relative density	N/D
Relative vapor density	N/D

SECTION 10: Stability and reactivity

10.1 Reactivity: Reacts violently with strong oxidizers.Increased risk of fire or explosion.Certain mixtures of chlorine may be flammable or reactive under certain conditions.
10.2 Chemical stability: Certain mixtures of chlorine may be flammable or reactive under certain conditions.
10.3 Possibility of hazardous reactions: Hazardous polymerization will not occur.
10.4 Conditions to avoid: Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.
10.5 Incompatible materials: Strong acids, strong bases, strong oxidizers. Chlorine. Finely divided metals. Magnesium. Alkaline earth metals.
10.6 Hazardous decomposition products: Thermal decomposition may produce: Carbon oxide(s), chlorine compounds, hydrogen chloride.

SECTION 11: Toxicological information

Acute toxicity:
Acetone: LD50 Skin – Guinea pig – 7429 mg/kg; LC50 Inhalation – Rat – 50100 mg/m3 – 8 hrs; LD50 Oral – Rat – 5800 mg/kg
Ethanol: LD50 Oral – Rat – 10470 mg/kg; LD50 Skin – Rabbit – 15800 mg/kg; LD50 Inhalation – Rat – 30000 mg/l – 4 hrs

Skin corrosion/irritation: Causes irritation, redness, burning.
Serious eye damage/irritation: Causes irritation, redness, tearing.
Respiratory or skin sensitization: Causes dizziness, headaches, nausea, central nervous system depression, excessive or prolonged exposure may cause unconsciousness.
Germ cell mutagenicity: Not classified.
Carcinogenicity: Not classified.
Reproductive toxicity: Not classified.
Specific target organ toxicity (STOT) – single exposure: May cause drowsiness or dizziness.
Specific target organ toxicity (STOT) – repeated exposure: Not classified.
Aspiration hazard: The ATE (gas inhalation) of the mixture is: 5625 ppmV.

Additional information:
Symptoms/Injuries: Harmful if inhaled.Causes serious eye irritation. May cause drowsiness and dizziness.Asphyxia by lack of oxygen: risk of death.May cause frostbite on contact with the liquid.
Symptoms/Injuries After Inhalation: High concentrations may cause central nervous system depression.Inhalation is likely to cause adverse health effects including irritation, difficulty breathing, and unconsciousness.In elevated concentrations, may cause asphyxiation, central nervous system effects, and increased breathing rate.Symptoms include headache, dizziness, rapid breathing, increased pulse, mood changes, tremors, cyanosis, muscular weakness, narcosis, numbness of the extremities, unconsciousness and death.This product contains chlorinated solvent material, which is associated with cardiac sensitization following very high exposures or with concurrent exposure to high stress levels or heart-stimulating substances.Careful consideration should be applied preceding administration of epinephrine or similar heart-stimulating substances.
Symptoms/Injuries After Skin Contact: Contact with liquid escaping the container can cause frostbite and freeze burns.
Symptoms/Injuries After Eye Contact: Contact causes severe irritation with redness and swelling of the conjunctiva.Contact with liquid escaping the container can cause frostbite, freeze burns, and permanent eye damage.
Symptoms/Injuries After Ingestion: Not considered a potential route of exposure, but contact with liquid escaping the container can cause freeze burns and frostbite.
Chronic Symptoms: None known.

SECTION 12: Ecological information

Toxicity:
Acetone: LC50 – Oncorhynchus mykiss (rainbow trout) – 5540 mg/l – 96 hrs; LC50 – Daphnia magna (water flea) – 8800 mg/l – 48 hrs
Ethanol: EC50 – Chlorella vulgaris (fresh water algae) – 275 mg/l – 72 hrs; LC50 – Pimephales promelas (fathead minnow) – 14200 mg/l – 96 hrs; LC50 – Ceriodaphnia dubia (water flea) – 5012 mg/l – 48 hrs
Trans-1,2-dichloroethylene: EC50 – Daphnia magna (water flea) – 220 mg/l

Persistence and degradability: Component(s) of this product are not biodegradable.May cause long-term adverse effects in environment.
Bioaccumulative potential: Not established.
Mobility in soil: No additional information available.
Other adverse effects: Avoid release to the environment.

SECTION 13: Disposal considerations

Disposal methods
Product disposal: Dispose of contents/container in accordance with local, regional, national, and international regulations.Do not pierce or burn, even after use.
Sewage disposal: Avoid release into the environment.This material is hazardous to the aquatic environment. Keep out of sewers and waterways.
Other disposal recommendations: Container may remain hazardous when empty. Continue to observe all precautions. Do not puncture or incinerate container.Product should be fully characterized prior to disposal.

SECTION 14: Transport information

DOT (US): UN Number: UN1993; Class: 3; Packing Group: II; Proper Shipping Name: Flammable liquids, n.o.s.
IMDG: UN Number: UN1993; Class: 3; Packing Group: II; EMS Number: N/A; Proper Shipping Name: Flammable liquids, n.o.s.
IATA: UN Number: UN1993; Class: 3; Packing Group: II; Proper Shipping Name: Flammable liquids, n.o.s.

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Massachusetts Right To Know Components (105 CMR 670):
Chemical name: DICHLOROETHYLENE TRANS; CAS number: 156-60-5
Chemical name: DENATURED ALCOHOL; CAS number: 64-17-5
Chemical name: ACETONE; CAS number: 67-64-1

Massachusetts Toxic Use Reduction Act (TURA) list:
Chemical name: 1,2-Dichloroethylene (trans); CAS number: 156-60-5
Chemical name: Acetone; CAS number: 67-64-1

New Jersey Right To Know Components:
Common name: ETHYL ALCOHOL; CAS number: 64-17-5
Common name: ACETONE; CAS number: 67-64-1

Pennsylvania Right To Know Components:
Chemical name: ETHENE, 1,2-DICHLORO-, (E)-; CAS number: 156-60-5
Chemical name: ETHANOL; CAS number: 64-17-5
Chemical name: 2-PROPANONE; CAS number: 67-64-1

US EPA TSCA public inventory:
Chemical name: Trans-1,2-dichloroethylene; CAS number: 156-60-5
Chemical name: Ethanol; CAS number: 64-17-5
Chemical name: Acetone; CAS number: 67-64-1

SECTION 16: Other information

N/A = Not applicable; N/D = Not determined

16.1 Further information/disclaimer: To the best of our knowledge, information contained herein is accurate.However there is no assumption of liability for the accuracy or completeness of the information contained herein.Final determination of suitability of any material is the sole responsibility of the user.All materials may present unknown hazards and should be used with caution.Although certain hazards are described herein, we cannot guarantee that these are the only hazard which exists.The information contained in this SDS was obtained from current and reliable sources;however, the data is provided without warranty, expressed or implied, regarding its correctness or accuracy.Since the conditions of handling, storage and disposal of this product are beyond the control of the manufacturer, the manufacturer will not be responsible for loss, injury, or expense arising out of the products improper use.No warranty, expressed or inferred, regarding the product described in this SDS shall be created or inferred by any statement in this SDS.Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this SDS.The user is responsible for full compliance.

16.2 Preparation information: Prepared by: Jessica Wilson; Date prepared: 3-11-2025