Coat It Blue Touch Up
Convenient and Durable Touch-Up Solution
Coat It Blue Touch Up is a convenient, 10-ounce aerosol can designed for easy and efficient repair of your Coat It Bluecoating. This essential product allows you to quickly address small scratches, nicks, or missed spots, ensuring the continued integrity of your HVAC corrosion protection.
Key Features and Benefits:
- Targeted Application: The aerosol format allows for precise application on small, specific areas.
- Restores Protection: Quickly restores the durable corrosion protection to damaged spots.
- Seamless Finish: Blends seamlessly with the original coating to maintain a uniform appearance.
- Fast-Drying: Minimizes downtime, allowing for rapid repairs.
- Extends Longevity: Helps to extend the overall lifespan of the original Coat It Blue application.
Coat It Blue Touch Up is a valuable asset for professionals and homeowners seeking a convenient, reliable way to maintain the superior protection of their HVAC equipment.
Part Number; Size CIBA-1
Contact Us
News and Updates
Subscribe on Youtube
Follow Us on Facebook
SDS
COAT IT BLUE AEROSOL SDS REV. 1
Safety Data Sheet – Coat IT Blue Aerosol
Vapco Products, Inc.
Identification & Supplier Details (SDS Section 1)
| Product Information |
| Product Name / Identifier |
Coat IT Blue Aerosol (CIBA-1) / Brand: Vapco |
| Recommended Use |
Corrosion protection coating aerosol |
| Supplier Details |
| Name & Address |
Vapco Products, Inc. / 401 Marshall Road, Valley Park, Missouri 63088, United States |
| Contact Information |
Tel: (636) 923-2121 | Fax: (636) 923-3002 | Email: [email protected] |
| Emergency Phone Number |
(800) 255-3924 |
Hazard Identification & Composition (SDS Sections 2 & 3)
| Classification & Labeling |
| GHS Classification (OSHA) |
Acute Toxicity (Oral & Inhalation), Skin Corrosion/Irritation Cat. 1B, Eye Damage Cat. 1, Gases under pressure, STOT-SE Cat. 3. |
| Signal Word / Pictograms |
**Danger** / |
| Hazard Statement(s) |
H280: Contains gas under pressure; may explode if heated. H302+H332: Harmful if swallowed or inhaled. H314: Causes severe skin burns and eye damage. H336: May cause drowsiness or dizziness. |
| Key Precautionary Statements |
**P260:** Do not breathe vapors/spray. **P280:** Wear protective gloves/clothing/eye protection. **P310:** Immediately call a POISON CENTER/doctor. **P410+P403:** Protect from sunlight. Store in a well-ventilated place. |
| Hazardous Component |
CAS No. |
Concentration (wt) |
| Isopropyl alcohol |
67-63-0 |
1 – 20 % |
| 2-Butoxyethanol |
111-76-2 |
1 – 20 % |
| Dimethylaminoethanol |
108-01-0 |
1 – 10 % |
| Nitrogen |
7727-37-9 |
1 – 5 % |
Physical & Chemical Properties (SDS Section 9)
| Property |
Value |
| Physical State / Appearance / Color |
Liquid / **Aerosol spray** / Blue |
| Odor / Odor Threshold |
Characteristic / N/D |
| pH |
8.0-10.0 |
| Density and/or Relative Density |
0.95-1.10 |
| Flammability |
Not considered a flammable aerosol by OSHA (29 CFR 1910.1200) |
| Flash Point / Boiling Point |
N/D / N/D |
| Solubility |
Soluble in water |
Stability & Reactivity (SDS Section 10)
| Factor |
Condition / Material |
| Chemical Stability / Reactivity |
Stable under normal conditions of use. **Contains gas under pressure; may explode if heated.** |
| Conditions to Avoid |
Excessive heat. Do not expose to temperatures exceeding 50°C/122°F. |
| Incompatible Materials |
**Strong oxidizing agents.** |
| Hazardous Decomposition Products |
Carbon oxide(s) and nitrogen oxide(s). |
Toxicological Information (SDS Section 11)
| Endpoint |
Summary / ATE (Mixture) |
| Acute Toxicity |
**Harmful if swallowed or inhaled.**
ATE Oral: 1666.67 mg/kg bw | ATE Gas Inhalation: 15000 ppmV | ATE Vapor Inhalation: 36.67 mg/l |
| Skin Corrosion/Irritation |
Causes mild skin irritation. |
| Serious Eye Damage/Irritation |
**Causes serious eye irritation**, redness, burning. |
| STOT – Single Exposure |
May cause **drowsiness or dizziness**. |
| STOT – Repeated Exposure |
May cause damage to organs through prolonged or repeated exposure. |
| Carcinogenicity / Mutagenicity / Reproductive Toxicity |
Not classified. |
First-Aid Measures (SDS Section 4)
| Exposure Route |
Action Required |
| General Advice / Emergency (P310) |
If you feel unwell or exposed, **Immediately call a POISON CENTER/doctor**. Show the label where possible. |
| Inhaled (P304+P340) |
Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention. |
| Skin Contact (P303+P361+P353) |
Take off immediately all contaminated clothing. **Rinse skin with water/shower for at least 15 minutes.** Obtain medical attention if irritation persists. |
| Eye Contact (P305+P351+P338) |
**Rinse cautiously with water for several minutes.** Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention. |
| Swallowed (P301+P330+P331) |
Rinse mouth. **Do NOT induce vomiting.** Obtain medical attention. |
Fire-Fighting & Accidental Release Measures (SDS Sections 5 & 6)
| Measure Type |
Details |
| Suitable Extinguishing Media |
Water spray, fog, carbon dioxide (CO2), alcohol-resistant foam, dry chemical, or sand. |
| Specific Hazards |
**Container may explode in heat of fire** (Pressurized container). Vapors are heavier than air and may travel to an ignition source and flash back. |
| Protection During Fire-Fighting |
Wear NIOSH-approved Self-Contained Breathing Apparatus (SCBA) with full face piece operated in a positive pressure demand mode. |
| Accidental Release Precautions (P260) |
**Do not breathe vapors/spray/mist/gas.** Eliminate ignition sources. Evacuate and ventilate the area. |
| Containment & Clean-up |
Contain any spills with dikes or absorbents. Take up liquid spill into absorbent material. Transfer to a suitable container for disposal. Avoid release to the environment/sewers. |
Handling, Storage & PPE (SDS Sections 7 & 8)
| Area / Equipment |
Requirements / Controls |
| Safe Handling Precautions (P264, P270) |
**Wash hands thoroughly after handling.** Do not eat, drink or smoke when using. Do not pierce or burn container. |
| Storage Conditions (P405, P410+P403) |
**Store locked up.** Protect from sunlight. Store in a cool, well-ventilated place. Do not expose to temperatures exceeding 50°C/122°F. Incompatible Materials: **Strong oxidizing agents.** |
| Exposure Limits (Isopropyl alcohol) |
OSHA PEL: 400 ppm (980 mg/m3) | NIOSH REL: 400 ppm (TWA), 500 ppm (ST) |
| Exposure Limits (2-Butoxyethanol) |
OSHA PEL: 50 ppm (240 mg/m3) | NIOSH REL: 5 ppm |
| Eye/Face Protection (P280) |
**Chemical safety goggles.** |
| Skin/Body Protection (P280) |
**Wear protective gloves** and suitable chemical resistant clothing. |
Transport & Regulatory Information (SDS Sections 14 & 15)
| Transport Mode |
UN Number |
Class (PG) |
Proper Shipping Name |
| DOT (US) / IMDG / IATA |
**UN1950** |
**2.2 (N/A)** |
Aerosols, non-flammable, (each not exceeding 1 L capacity) |
| U.S. Regulatory Information (State/TSCA) |
| State Right-to-Know Components |
Isopropyl alcohol (67-63-0), 2-Butoxyethanol (111-76-2), Dimethylaminoethanol (108-01-0), and Nitrogen (7727-37-9) are listed in MA, NJ, and PA. |
| TSCA Inventory Status |
All chemical components are listed or exempt. |
Disposal & Ecological Information (SDS Sections 13 & 12)
| Area |
Guidance |
| Product Disposal (P501) |
**Dispose of contents/container** in accordance with local, regional, national, and international regulations. Do not pierce or burn. |
| Sewage Disposal / Ecological Hazard |
Avoid release into the environment. This material is **hazardous to aquatic life**. Keep out of sewers and waterways. |
| Persistence, Degradability, Bioaccumulation, Mobility |
Not classified for any of these ecological endpoints. |
Disclaimer & Preparation Information (SDS Section 16)
Disclaimer:
To the best of our knowledge, information contained herein is accurate. However there is no assumption of liability for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. The information contained in this SDS was obtained from current and reliable sources; however, the data is provided without warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond the control of the manufacturer, the manufacturer will not be responsible for loss, injury, or expense arising out of the products improper use. The user is responsible for full compliance with all government regulations.
N/A = Not applicable; N/D = Not determined
Prepared by: Jessica Wilson, Date prepared: 3-6-2025
