Coat It Blue: Revolutionizing HVAC Corrosion Protection
Tired of costly and time-consuming HVAC maintenance?
Introducing Coat It Blue, the revolutionary corrosion protection solution that eliminates the need for disruptive disassembly and transportation.
Key Benefits:
- On-Site Application: Applied directly at your location, minimizing downtime and disruption to your business or home.
- Fast and Efficient: Reduces maintenance time and streamlines the process.
- Water-Based Technology: Safe and environmentally friendly, with low odor and NSF accreditation.
- Unmatched Corrosion Protection: Provides up to 5+ years of protection against neutral salt spray corrosion.
- Improved Efficiency: Reduces operating costs by maintaining optimal heat exchanger performance.
- Cost-Effective Solutions: Available in various sizes to suit your needs, from small touch-up aerosols to large 55-gallon drums for commercial applications.
Experience the Coat It Blue difference:
- Enhanced Convenience: Minimize downtime and disruption to your daily routine.
- Reduced Costs: Streamline maintenance and lower overall project costs.
- Superior Protection: Extend the lifespan of your HVAC equipment with unmatched corrosion resistance.
Choose Coat It Blue for a safer, more efficient, and cost-effective way to protect your HVAC investment.
- CIB-SC (10LBS)
- CIB-LC (30LBS)
Contact Us
News and Updates
Subscribe on Youtube
Follow Us on Facebook
SDS
COAT IT BLUE CYLINDER SDS REV. 1
Safety Data Sheet – Coat IT Blue Cylinder
Vapco Products, Inc.
Identification & Supplier Details (SDS Section 1)
| Product Information |
| Product Name / Identifier |
Coat IT Blue Cylinder (CIB-LC, CIB-SC) / Brand: Vapco |
| Recommended Use |
Corrosion protection coating |
| Supplier Details |
| Name & Address |
Vapco Products, Inc. / 401 Marshall Road, Valley Park, Missouri 63088, United States |
| Contact Information |
Tel: (636) 923-2121 | Fax: (636) 923-3002 | Email: [email protected] |
| Emergency Phone Number |
(800) 255-3924 |
Hazard Identification & Composition (SDS Sections 2 & 3)
| Classification & Labeling |
| GHS Classification (OSHA) |
Acute Toxicity (Oral & Inhalation, Cat. 4), Skin Corrosion/Irritation Cat. 1B, Eye Damage Cat. 1, Gases under pressure (Compressed Gas), STOT-SE Cat. 3. |
| Signal Word / Pictograms |
**Danger** / |
| Hazard Statement(s) |
H280: Contains gas under pressure; may explode if heated. H302: Harmful if swallowed. H314: Causes severe skin burns and eye damage. H332: Harmful if inhaled. H336: May cause drowsiness or dizziness. |
| Key Precautionary Statements |
**P260:** Do not breathe vapors/spray. **P280:** Wear protective gloves/clothing/eye protection. **P312:** Call a POISON CENTER/doctor if you feel unwell. **P410+P403:** Protect from sunlight. Store in a well-ventilated place. |
| Hazardous Component |
CAS No. |
Concentration (wt) |
| Isopropyl alcohol |
67-63-0 |
1 – 20 % |
| 2-Butoxyethanol |
111-76-2 |
1 – 20 % |
| Dimethylaminoethanol |
108-01-0 |
1 – 10 % |
| Nitrogen |
7727-37-9 |
1 – 5 % |
Physical & Chemical Properties (SDS Section 9)
| Property |
Value |
| Physical State / Appearance / Color |
Liquid / **Pressurized cylinder** / Blue |
| Odor / Odor Threshold |
Characteristic / N/D |
| pH |
4.0-8.0 |
| Density and/or Relative Density |
1.02-1.20 |
| Flammability |
Not considered a flammable aerosol or an extremely flammable aerosol by OSHA (29 CFR 1910.1200) |
| Flash Point / Boiling Point |
N/D / N/D |
| Solubility |
Soluble in water |
Stability & Reactivity (SDS Section 10)
| Factor |
Condition / Material |
| Chemical Stability / Reactivity |
Stable under normal conditions of use. **Contains gas under pressure; may explode if heated.** |
| Conditions to Avoid |
Excessive heat. Do not expose to temperatures exceeding 50°C/122°F. |
| Incompatible Materials |
**Strong oxidizing agents.** |
| Hazardous Decomposition Products |
Carbon oxide(s) and nitrogen oxide(s). |
Toxicological Information (SDS Section 11)
| Endpoint |
Summary / ATE (Mixture) |
| Acute Toxicity |
**Harmful if swallowed or inhaled.**
ATE Oral: 1666.67 mg/kg bw | ATE Gas Inhalation: 3247.42 ppmV |
| Skin Corrosion/Irritation |
Causes mild skin irritation. |
| Serious Eye Damage/Irritation |
**Causes serious eye irritation**, redness, burning. |
| STOT – Single Exposure |
May cause **drowsiness or dizziness**. |
| STOT – Repeated Exposure |
Not classified. |
| Carcinogenicity / Mutagenicity / Reproductive Toxicity |
Not classified. |
First-Aid Measures (SDS Section 4)
| Exposure Route |
Action Required |
| General Advice / Emergency |
If you feel unwell or exposed, call a POISON CENTER/doctor. Show the label where possible. |
| Inhaled (P304+P340) |
Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention. |
| Skin Contact (P303+P361+P353) |
Take off immediately all contaminated clothing. **Rinse skin with water/shower for at least 15 minutes.** Obtain medical attention if irritation persists. |
| Eye Contact (P305+P351+P338) |
**Rinse cautiously with water for several minutes.** Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention. |
| Swallowed (P301+P330+P331) |
Rinse mouth. **Do NOT induce vomiting.** Obtain medical attention. |
Fire-Fighting & Accidental Release Measures (SDS Sections 5 & 6)
| Measure Type |
Details |
| Suitable Extinguishing Media |
Water spray, fog, **carbon dioxide (CO2)**, alcohol-resistant foam, dry chemical, or sand. |
| Specific Hazards |
**Container may explode in heat of fire** (Pressurized container). Fight fire remotely due to explosion risk. |
| Protection During Fire-Fighting |
Wear NIOSH-approved Self-Contained Breathing Apparatus (SCBA) with full face piece. |
| Accidental Release Precautions (P260) |
**Do not breathe vapors/gas.** Eliminate ignition sources. Evacuate and ventilate the area. |
| Containment & Clean-up |
Ventilate the area. Contain spills with dikes or absorbents. Take up liquid spill into absorbent material. Avoid release to the environment/sewers. |
Handling, Storage & PPE (SDS Sections 7 & 8)
| Area / Equipment |
Requirements / Controls |
| Safe Handling Precautions (P264, P270) |
**Wash hands thoroughly after handling.** Do not eat, drink or smoke when using. Do not pierce or burn container. |
| Storage Conditions (P405, P410+P403) |
**Store locked up.** Protect from sunlight. Store in a cool, well-ventilated place. Do not expose to temperatures exceeding 50°C/122°F. Incompatible Materials: **Strong oxidizing agents.** |
| Exposure Limits (Isopropyl alcohol) |
OSHA PEL: 400 ppm (980 mg/m3) | NIOSH REL: 400 ppm (TWA), 500 ppm (ST) |
| Exposure Limits (2-Butoxyethanol) |
OSHA PEL: 50 ppm (240 mg/m3) | NIOSH REL: 5 ppm |
| Eye/Face Protection (P280) |
**Chemical safety goggles.** |
| Skin/Body Protection (P280) |
**Wear protective gloves** and suitable chemical resistant clothing. |
Transport & Regulatory Information (SDS Sections 14 & 15)
| Transport Mode |
UN Number |
Class (PG) |
Proper Shipping Name |
| DOT (US) / IMDG / IATA |
**UN1956** |
**2.2 (N/A)** |
Compressed gas, n.o.s |
| U.S. Regulatory Information (State/TSCA) |
| State Right-to-Know Components |
Isopropyl alcohol (67-63-0), 2-Butoxyethanol (111-76-2), Dimethylaminoethanol (108-01-0), and Nitrogen (7727-37-9) are listed in MA, NJ, and PA. |
| TSCA Inventory Status |
All chemical components are listed or exempt. |
Disposal & Ecological Information (SDS Sections 13 & 12)
| Area |
Guidance |
| Product Disposal (P501) |
**Dispose of contents/container** in accordance with local, regional, national, and international regulations. Do not pierce or burn. |
| Sewage Disposal / Ecological Hazard |
Avoid release into the environment. This material is **hazardous to aquatic life**. Keep out of sewers and waterways. |
| Persistence, Degradability, Bioaccumulation, Mobility |
Not classified for any of these ecological endpoints. |
Disclaimer & Preparation Information (SDS Section 16)
Disclaimer:
To the best of our knowledge, information contained herein is accurate. However there is no assumption of liability for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. The information contained in this SDS was obtained from current and reliable sources; however, the data is provided without warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond the control of the manufacturer, the manufacturer will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this SDS shall be created or inferred by any statement in this SDS. The user is responsible for full compliance with all government regulations.
N/A = Not applicable; N/D = Not determined
Prepared by: Jessica Wilson, Date prepared: 3-7-2025
